Quick Detail
The Stainless steel annular corrugated flexible metal hose are good at decreasing vibration and noise. The project quality and usage life of equipment will be significantly extended if such hoses are installed at inlet and outlet of the pump and compressor. The product can avoid disadvantages of rubber fitting, such as aging and burst caused by material fatigue and failure. The annular corrugated flexible metal hose are fine choices for engineering design and application because they can not only reduce the vibration and noise during operation but also compensate misalignment of pipeline.
1.To absorb effectively vibration, noise,thermal expansion from pipeline system;
2.To resolve minor deviation because of piping connecting and eliminate the pipeline residual stress;
3.Applied to repeated motion in high temperature areas,good anti-fatigue performance;
4.Good flexibility,resistant to high temperature, resistant to corrosion.
5.Applied in the fields of petroleum,chemical industry,aerospace,metallurgy,electricity, gas,building,mechanical, construction,iron and steel,paper making,fabric,medicine,food and vessels ect.
What is the features of our metal flexible hose?
1.Bend easily and easy to install.
2.It is able to bear corrosion resistance and heat resistance strongly, stainless steel materials can be used safely for years .
3.Outside is covered with stainless steel wire braided ,have high bearing capacity.
4. Applied to repeated motion region in high-temperature areas, good anti-fatigue performance.
5.Diameter and length,welded on the end of hose can be produced as customer's requirement.a variety of end fitting configurations such as threaded(both NPT and BSP);fixed and floating flanges(stainless steel and carbon steel);welding neck connection and quick fittings.
Inner Core: Corrugated Stainless Steel
Flexible metal hose stainless steel core strengths are available in 304, 321 and 316L stainless steel
Stainless steel tubing formed into corrugations parallel to one another
Helical / Convoluted option available upon request
Outer Core:Braided Stainless Steel Layers
Purchase corrugated core hose with no layers, single or double braided
Flexible metal hose outer braid layers made from 304 stainless steel
Specifications
Hose material:SUS304(SUS316,SUS316L,SUS321 are available)
Braiding material:SUS304
Fitting material:SUS304 (SUS316,SUS316L, carbon steel are available)
Connection:Fixed Flange
Manufacturing standards:GB,ISO 10380
*Regarding to the special standards and materials, please contact with our sales team.
What is the features of our metal flexible hose?
1.Bend easily and easy to install.
2.It is able to bear corrosion resistance and heat resistance strongly, stainless steel materials can be used safely for years .
3.Outside is covered with stainless steel wire braided ,have high bearing capacity.
4. Applied to repeated motion region in high-temperature areas, good anti-fatigue performance.
5.Diameter and length,welded on the end of hose
Why choose our metal flexible hose ?
1.100% quality assurance. Inner corrugated hose and outside wire braid are all made of stainless steel 304. This way can avoid media corrosion to the metal hose and largely prolong the life-span of the metal hose
Poor quality metal hoses are usually made of SS202, even some suppliers use the material of SS201 to make
can be produced as customer's requirement.a variety of end fitting configurations such as threaded(both NPT and BSP);fixed and floating flanges(stainless steel and carbon steel);welding neck connection and quick fittings.
Inner Core: Corrugated Stainless Steel
To properly design a metal hose assembly for a particular application, the following design parameters must be determinde:
1. Temperature-----You should provide us information as the temperature to which the assembly is exposed a
proper fit.
2. Size-----The diameter of the connections in which the assembly will be installed is needed to provide.
3. Media-----This is improtant since you must be sure that the assembly's components are chemically
compatible with the media going through the hose as well as the environment in which the hose is installed.
4. Pressure-----identify the internal pressure to which the assembly will be exposed. This information is
important to determine if the assembly is strong enough for the application.
5. Indenify the necessary end fittings-----This is required since fittings for the assembly must be chosen to
properly fit the mating connection.
| Pipe Diameter |
DN1/2-32inch |
| Pipe Material |
SS304,316L,etc |
| Pipe thickness |
0.18-2.0mm |
| Braided mesh material |
SS304 etc |
| Braided mesh layer |
single layer or double layers |
| Max. woking pressure |
10Mpa |
| Working temperature |
(-196)~(+700) °c |
| Connect type |
flange,thread,welded.etc |
| Standard |
ANSI,JIS,DIN,GOST,etc |
| Flange material |
stainless steel or carbon steel |
| Pipe assembly length |
according to clients' requirements |
Technical Data
| Dia.(mm) |
ID(mm) |
OD(mm) |
Thickness(mm) |
Weight/m |
| DN12 |
12 |
18 |
0.2 |
0.18 |
| DN15 |
17 |
21.5 |
0.3 |
0.32 |
| DN18 |
18 |
25 |
0.3 |
0.38 |
| DN20 |
20 |
27 |
0.3 |
0.42 |
| DN25 |
25 |
32.5 |
0.3 |
0.53 |
| DN32 |
32 |
42 |
0.3 |
0.67 |
| DN40 |
40 |
51.5 |
0.3 |
0.84 |
| DN50 |
50 |
62 |
0.3 |
1.05 |
| DN65 |
65 |
78 |
0.3 |
1.37 |
| DN80 |
80 |
96 |
0.4 |
2.24 |
| DN100 |
100 |
120 |
0.4 |
2.80 |
| DN125 |
125 |
147 |
0.4 |
3.50 |
| DN150 |
150 |
175 |
0.4 |
4.20 |
