Quick Detail
Urea Automatical Fuel Nozzle
Our Nozzle Serial Products More Specification as flow:
| Item |
Inlet Size |
Outlet Size |
Colour |
Spout Longth |
| AC - 11A |
NPT3/4", BSP3/4 |
1/2, 3/4 |
Red, Balck, Greeen, Yelllow |
L,S |
| AC-7h |
NPT1" BS 1' |
1-1/16 |
Red, Black, Green, Yellow |
L, S |
| AC-ZVA |
NPT 3/4", BSPT3/4" |
1/2, 3/4 |
Red, Black, Green, |
S |
| AC-Bada |
NPT 3/4" BSP3/4" |
3/4' |
Red, Black, Green |
S |
Note: The Spout Size: L=Longer Spourt, it is espcially for truck, S=Standard Spourt
The packing spcification, we can print it according to customer's requirement or design.
| Out Carton Size |
43x34x38cm |
| Inner Carton Size |
43x17x7.5cm |
| Gross Weight |
23kg |
| Net Weight: |
22kg |
- Introduction
11A Stainless steel fuel nozzle . It is used to measure the volume flowrate of liquid passing through the pipe. This nozzle can be assembled with different pumps and flowmeters, and is widely applied for refueling of engines, cars, motorbikes, tractors, etc.
- Features
a. can be used for different media like gasoline, diesel, kerosene and chemicals, adblue
b. high accuracy, light weight, compact volume makes it convenient for carrying
c. automatic shutoff function when oil transfer finish(oil reaching the nozzle spout hole)
d. 3 level of flowrate control for oil transfe, stainless steel body anti corrosion
e. filter on the inlet part prevents impurites when oil transfer
- Technical Specifications
| Model Number |
CDI-N03 |
| Inlet Size |
BSP/NPT 3/4' |
| Outlet Size |
1/2' |
| Flowrate |
0-60 lpm |
| Application Media |
gasoline, kerosene, diesel, adblue, chemicals |
| Shutoff Sensitivity |
0.3 second |
| Working Pressure |
0.18Mpa |
| Material |
Stainless Steel |
| Package |
10 pcs/carton |
| Inlet |
NPT3⁄4″ |
BSPT3⁄4″ |
| outlet |
15⁄16″ |
13⁄16″ |
| Flow range |
0—60 L/min |
0—45 L/min |
| nominal pressure |
0.18MPA |
0.18MPA |
| Self sealing sensitivity |
0.1s |
0.1s |
11A stainless steel self-sealing fuel nozzle
11A stainless steel self-sealing fuel nozzle has the function of automatically closing the gun after filling the container with oil. It is a modernized matching of the metering refueling machine. It is especially suitable for unmanned gas stations, which can prevent oil or foam from overflowing, keep the station clean and reduce the atmosphere. Pollution.
1. Features:
(1) The fuel nozzle has a slim shape and a balanced weight of the gun body, which is convenient and labor-saving.
(2) The parts are made of stainless steel, and the nozzle body, the nozzle head and the muzzle are made of stainless steel. It has high strength, wear resistance, corrosion resistance and excellent sealing performance.
(3) The fuel nozzle is equipped with a bright plastic sheath, comfortable operation, oil gun protection, landscaping tanker, and jackets of various colors.
2. Install the connector:
(1) If the fuel nozzle is imported with NPT (American Standard) taper threads, it must be sealed with a suitable sealant.
(2) If the fuel nozzle inlet is a BSPT (British Standard) straight thread, it must be sealed with a rubber O-ring.
(3) The connection between the joint and the oil gun inlet should be carefully tightened. Do not over-tighten the thread to avoid cracking of the fuel nozzle body.
3. Working principle:
A fine vacuum tube is installed in the nozzle. When the pressure rod is in the "on" position, the liquid flowing from the oil gun causes air to be drawn into the vacuum tube through the small hole in the nozzle. As long as air passes through the vacuum tube, the liquid continues to flow, when the fuel tank When the liquid level in the rise rises to cover the height of the small hole in the nozzle, the air stops flowing and the fuel nozzle closing device automatically starts.
4. Technical data
5. Operation:
(1) The fuel nozzle switch is equipped with 3 fixed gear positions, which can be refueled according to the flow rate.
(2) During the refueling process, when the oil or foam floods the air vent at the lower end of the barrel, the oil gun is closed by itself. If the splash or foam causes the gun to close, wait until the foam disappears before shooting.
(3) When using the gear position control to refuel, you can use the anti-slip spring card on the barrel to refuel in the fuel tank without the need for hand protection.
6. Maintenance:
(1) The vent hole at the lower end of the barrel should be kept open, and it will not work normally after being blocked by foreign objects.
(2) Hang up the oil gun after use to avoid collision.
(3) No need for lubrication and durability.
