Quick Detail
oil gas recovery automatic shutoff nozzle re connectable breakaway
Self-sealing breakaway valve,which connects vapor recovery nozzle and coaxial hose,is to protect fuel dispenser,hose sets and vehicles by it’s quick disconnection and the shut-off of the oil circuit when the sudden leave happened.
Features and Benefits
*Good electrical conductivity
*Excellent galvanizing avoids corrosion and oxidation.
*Fluoride nitrile rubber sealing ring with perfect sealing character ensures no leakage for a long time.
*Sealing test and tensile test before delivery.
*CNEX and Atex certified
| Breakaway Technical Parameter |
| Connection |
Male/Femal |
| Outlet Thread |
M34*1.5 |
| Female/Male,BSPT/NPT |
Female/Male,BSPT/NPT |
| Pull-off force |
800N-1500N |
| Package Data |
gift box/pcs,brown box/100pcs,then in wooden carton |
| Packing method |
Siz |
N.W(kg) |
G.W(kg) |
| 1pcs/gift box |
100*46*46 |
0.141 |
0.155 |
| 100pcs/brown carton |
490*275*240 |
14.1 |
15.55 |
Maintenance
Please note that when installing the shutoff valve, you can only apply force on one end of the pull valve. Do not apply force at both ends. Avoid human damage during installation.
Do not rotate or twist artificially during use.
Check regularly for oil seepage.
Opw oil and gas recovery pull-off valve
Selling point: easy to install, safe, environmentally friendly, durable
Use range:
Suitable for vacuum assisted oil and gas recovery systems (both centralized and decentralized)
Can be matched with domestic brand tankers, foreign Token, stable, Gilbach, etc.
Name OPW gun pull-off valve
Body aluminum
Main seal nitrile rubber
Thread M34*1.5
Weight 220 g / support
Pulling force 800~1500N
Design pressure 50PSI 3.45bar
Features: can be directly connected to oil and gas recovery fuel gun
After the break, automatically close the oil end to prevent oil leakage
Reusable, no less than 10 times
Aluminum valve body and valve core, excellent electrical conductivity
100% in-plant air tightness test
It is used together with OPW secondary oil and gas recovery products, and also adapts to other oil and gas recovery hoses on the market.
Installation Notes:
Installed between the oil and gas recovery gun and the oil and gas recovery hose
Before installation, apply a proper amount of grease on the O-ring of the pull-off valve to prevent the O-ring from being crushed and damaged, without using the raw material belt.
The pull-off valve is assembled with the hose union first, and the other end is directly connected to the grease gun.
Tightening torque 68 Nm
It is recommended to use 41#
Note: When installing, the position is very important and can only be tightened on the mounting side. If the other end of the valve is tightened, it may damage the pull-off valve.
