Quick Detail
Gas Vapor Recovery Hose
Specification
Fuel Dispenser Hose Rubber Gas Vapor Recovery Hose
Nozzle side with factory assembled cannot be retrofitted because of non-reusable fittings.
Features and Benefits:
*Perfect structure design,easy to assemble.
*Measuring resistance of the thread is below 5Ω at both ends.
*Inside strengthened story of black nitrile butadiene rubber hose.
*No leakage under the pressure of 0.5Mpa at hose joint place.
*Hose joint can bear 2000N tensile force,holding 30s without separation.
*Length:Standard:4.5M/6M
*Acceptent:3.5-10M
Vapour Hose (inside)
Vapour Recovery hose DN8-PN16 (OD≈12mm) of polyurethane (LT-flexible). Resistant to petrol and ozone, low diffusion.
Remains stable also with narrow bending radii, because of the steel reinforcements. With vapour hose tail DN8 of PVDF black
with non-reusable stainless steel clamps.
Nozzle side with arresting device through locked vapour hose tail.
Pump side swivel supported to avoid twisting through torsion.
vapor recovery hose for oil fuel filling machine parts Technical Parameters:
| Technical Parameters |
| Model |
AGP-11A |
| Thread Spec |
M34*1.5 |
| Operating Temperature |
-40°C~+55°C |
| Working Pressure |
less than 0.35Mpa |
| Net Weight |
1.05kg |
| Name of Parameter |
Technical Indicator |
| Outer Tube ID*OD |
19.0mm*30.0mm |
| Inner Tube ID*OD |
10mm*7.5mm |
| Outer Tube Material |
NBR and Chemivic |
| Inner Tube Material |
Nylon |
| Connecting Thread |
M34×1.5 |
| Electrrical Conductivity |
≤5Ω |
| Airtightness |
0.5Mpa without leakage |
| Tensile Test |
2000N tensile force,holding 30s without separation |
| Hose Length |
4.5m-10m |
| Working Temperature |
-40~+55℃ |
| Packing method |
1pcs/brown box |
| Size |
510*510*70 |
| N.W(kg) |
3.652 |
| G.W(kg) |
4.188 |
